Everything that a vacuum picks up, no matter what
type it may be, needs to be deposited somewhere -
normally in a vacuum cleaner bag.

Back in 1920, the Air Way Sanitizer Company of
Ohio introduced the first vacuum cleaner with a
disposable vacuum bag. Until that time, the bags
for vacuum cleaners resembled the type of bags that
golfers used to carry their clubs. They were
somewhat heavy and awkard devices made out of
thick, stiff canvas, designed to be very flexible
and still keep dust and debris from the carpets
from escaping out into the air.

The improvements made by the Air Way Sanitizer
disposable vacuum bag went a long way toward
improving the effectiveness of the vacuum cleaner.
Made out of paper, the bag was designed to fit
inside of the cloth bag. Not only did it make
cleaning the vacuum easier, but it also kept the
insides of the stationary bag clean at all times
so that less of the dust and debris could be
blown out of the vacuum and make its way through
the home again.

In the beginning, each manufacturer designed
their own disposable vacuum cleaner bag made out
of different types of paper. You couldn’t
interchange the bags from one machine to the next,
as the fittings were different sizes with
different configurations for the opening of the
intake. Manufacturers who were once very
dependant on the sales of their machines had now
discovered an entirely new territory for the
disposable bags, and once again sales went through
the roof.

Before, a housewife had her vacuum cleaner and
the only thing it needed was to be cleaned and
serviced every now and then. If the man of the
house was around, the job normally went to him.
After a while, repair shops that specialized in
vacuum cleaners began to pop up all over the
place.

These days, there are very few vacuum cleaners
that use bags. Bagless is the way to go these days,
and for good reason. What was once a revolution
in household cleaning, is now rapidly fading away
and fast.

Models such as the Cyclone or Dirt Devil, are
now using cylinder technology to store the dirt
and dust. When you have finished vacuuming, you
simply empty the cylinder into the trash. Vacuum
bags can be very frustrating, which is why
millions of people are using bagless vacuums.

If you own a vacuum cleaner that uses bags, you
should look into upgrading it. Bagless vacuums
will save you time, money, and replacement. If
you’ve grown tired of the bags, now is the time
to get a better vacuum.

Not only do the bagless models have more power,
but they will also save you quite a few trips to
the store and the closet. They don’t cost a lot
of money either, and they are the perfect addition
to any household.

Technorati Tags: Canvas, Carpets, Cy, Debris, Disposable Bags, Golfers, Good Reason, Household Cleaning, Housewife, Improvements, Interchange, Job, Man Of The House, Matter What Type, Models, New Territory, Vacuum Bag, Vacuum Bags, Vacuum Cleaner, Vacuum Cleaners

If you are planning to really clean your home, car,
camper, or job site, you’ll want to check out one of
the many types of vacuum cleaners. There are several
out there, with each one offering you an array of
special uses and features.

The ideal thing to do is make a list of your price
range and budget and what you need your vacuum to do.
Then, you can start shopping around and narrow your
list down until you find the vacuum that is perfect
for your needs.

There are several vacuum machines on the market
today, and you’ll have no problems finding one that
will complete your tasks with ease and durability.

Vacuums are available in several different colors,
sizes, and prices. Basically, there are two types
of vacuum cleaners – wet and dry vacs, and there are
even companies out there that have found ways to
combine both features. You can choose from cordless,
handheld, and even bagless models. If you are
feeling really lazy, you can even purchase a robotic
vacuum cleaner that will vacuum your entire house for
you while you watch.

Normally, vacuum cleaners are made of either durable
plastic or aluminum. They range in colors, from
red to silver and white to blue. For the models,
you can choose from upright, canister, stick, hand
held, and shop vac models.

There are some vacuum cleaners that are specifically
designed to help get debris and dirt out from
under your car seat and others that are made to
help you clean your hardwood floors. Other features
can include extra detachable extension tools,
retractable power cords, a HEPA filter, and an
easy to reach power switch. There are even models
out there that will pick up nails and even glasses
of water.

Several companies out there produce vacuum cleaners,
including Oreck, Simplicity, Dyson, Hoover, Bosch,
Sanyo, Bissell, Eureka, and Kirby. If you are
looking for a vacuum cleaner, you have a large
selection of discounted and refurbished vacuums out
there waiting for you.

One of the greatest things about vacuum cleaners is
the fact that the sky is limit. There are literally
hundreds to choose from, giving you everything you
need to complete your task. The most popular
types of vacuums on the market today are bagless,
as there are no bags to change, all you need to
do is empty the cylinder after you vacuum.

Whenever you are shopping for a vacuum, you should
always compare prices. This way, you’ll get the
best deal for your money. They range in prices
from 30 dollars to 500, making it more than worth
your time and money to shop around. Before you
know it, you’ll have a vacuum cleaner that will
making cleaning your home or business both fun
and exciting.

Technorati Tags: Bissell, Car Camper, Car Seat, Different Colors, Durability, Durable Plastic, Dyson Hoover, Hardwood Floors, Hepa Filter, Home Car, Kirby, Power Cords, Power Switch, Robotic Vacuum Cleaner, Sanyo, Shop Vac, Vacs, Vacuum Cleaners, Vacuum Machines, Vacuums

Even though it may appear to be a very complicated
machine, the conventional vacuum cleaner is actually
made up of six essential components: intake port,
exhaust port, electric motor, fan, porous bag, and
a housing that stores all of the other components.

When you plug the vacuum cleaner into the outlet and
turn it on, the following happens:
1. First of all, the electric current will
operate the motor, which is attached to the fan,
which resembles an airplane propeller.
2. As the blades begin to turn, they will
force the air upwards, towards the exhaust port.
3. When the air particles are driven forwards,
the density of the particles will increase in front
of the fan and therefore decrease behind it.

The pressure drop that occurs behind the fan is
similar to the pressure drop when you take a drink
through a straw. The pressure level in the area
that is behind the fan will drop below the pressure
level that is outside of the vacuum cleaner.

This will create a suction inside of the vacuum
cleaner. The ambient air will push itself into the
vacuum cleaner through the intake port because the
air pressure that is inside of the vacuum cleaner
is much lower than the pressure on the outside.

Picking the dirt up
The stream of air that the vacuum generates is just
like a stream of water. The air particles that move
will rub against any loose dust or debris and if
it is light enough, the friction will carry the
material around the inside of the vacuum cleaner.

As the dirt continues on to the exhaust port, it
will pass through the cleaner bag. They tiny holes
in the vacuum cleaner bag are large enough to let
the air pass through, although too small for the
dust particles to fit through. Therefore, when
the air current gets into the bag, the dirt and
debris will be collected there.

You can stick the bag anywhere along the path
between the intake tube and the exhaust port, just
as long as the air current passes through.

Suction
The power of a vacuum cleaner’s suction will depend
on several factors. The suction can be stronger
or weaker depending on:
1. Fan power – In order to generate a
strong suction, the motor needs to turn at a good
speed.
2. Air passageway – When a lot of debris
builds up in the bag, the air will face a greater
level of resistance on the way out. Each particle
of air will move slowly due to the increase in
drag. This is the reason why a vacuum cleaner
works much better once you’ve replaced the bag
than when you have been using it for a while.
3. Size of the intake port – With the
speed of the vacuum fan being constant, the amount
of air that passes through the vacuum cleaner per
second is also constant.

Technorati Tags: Air Current, Air Particles, Air Pressure, Airplane Propeller, Ambient Air, Debris, Density, Dirt, Dust Particles, Electric Current, Exhaust Port, Friction, Intake Tube, Loose Dust, Tiny Holes, Vacuum Bag, Vacuum Cleaner, Vacuum Cleaners

The most important part of carpet maintenance is
removing and disposing of accumulated dry soil. The
removal of dry soil will improve the air quality
indoors, extend carpet life, and help to maintain
the carpet. Keeping regular maintenance on your
carpet is one thing, although being sure you have
the right equipment on the job is another.

The Green Label
For vacuum cleaners, the CRI (Carpet and Rug Institute)
has developed a Green Label testing program. The
CRI developed the performance protocol with the
goal of protecting indoor quality, keeping all
surfaces as clean as possible, and all without
putting dust back into the air.

The Green Label program helps to identify vacuum
cleaners that meet three different types of criteria:
1. Removing soil.
2. Keeping dust out of the air by
containing it within the filtration bag and the
machine itself.
3. It doesn’t damage the carpet and helps
to keep the appearance looking good.

The tests for determining the certification of a
vacuum cleaner were developed by carpet and vacuum
experts and reviewed by scientists with experience
in maintenance and the quality of indoor air.

Soil removal
The soil removal protocol will require that the
vacuum cleaner remove a specified quantity of soil
from the test carpet in four passes.

Dust containment
The protocol for dust containment will dictate the
total amount of dust particles that are released
into the surrounding air by the action of the
brush rolls, through the filtration bag, and any
leaks that come from the vacuum system. with this
test, the vacuum cleaner can’t release more than
100 micrograms of dust particles per cubic meter
of air.

Carpet retention
The testing protocol for appearance retention will
require that the vacuum cleaner not adversely
affect the appearance of the carpet, based on
a year of normal usage.

If a vacuum cleaner meets all three of the above
requirements, the manufacturer may then display
the official CRI Green Label on it’s brand of
vacuum cleaner. The CRI tests canister and upright
vacuums, wide area vacuums, and even walk behind
types as well.

Matching machines
Looking for that important Green Label is the first
step to providing longer carpet life and cleaner
air for your home or office. The next step is
selecting the proper vacuum cleaner for a specific
area. You can think of vacuum cleaners like
screwdrivers, as you wouldn’t want to use a Phillips
head screwdriver to remove a flathead screw.

In the bigger, more open areas, a wide are vacuum
cleaner or sweeper can produce excellent results,
as well as an increase in productivity. The
average 14 inch upright vacuum can clean at a rate
of 3,000 square feet per hour, while the average
walk behind can clean at a rate of 40,000 square
feet per hour, and also lift the pile of carpet in
high traffic areas where the carpet fibers are
subject to crushing and matting.

The two motor upright vacuum cleaner is an excellent
choice in areas such as executive offices, lobbies,
conference rooms, and break areas. A two motor
upright can provide grooming of the fibers in the
carpet and removal of the dry soil. Most uprights
with two motor setups will also have a removable
hose and on board accessories for cleaning other
areas as well, such as vents and chairs.

Along with the type of area, you should also give
some thought to the needs of the operator. If
you are a manager, you should look for vacuums
with ergonomic features, especially if the vacuum
will be used for long periods of time.

If it isn’t ergonomically designed, it could result
in injury to the operator. At the very least, the
cleaning operator might want to avoid using
vacuum cleaners that could result in injury.

Technorati Tags: Air Quality, Appearance, Carpet Life, Carpet Maintenance, Cri, Cubic Meter, Dirt, Dry Soil, Dust Containment, Dust Particles, Filtration, Leaks, Micrograms, Protocol, Rug Institute, Soil Removal, Surfaces, Vacuum Cleaner, Vacuum Cleaners, Vacuum System

There are many places that you can use to find parts
for a vacuum cleaner that is broken, providing you
have someone around that is handy enough with tools
to take a swing at fixing it. The part that breaks
the most on most less expensive vacuum cleaners
is the drive belt. It’s the rubberized belt that
is around 6 inches long, that when stretched out
turns the brushes on the bottom of the vacuum.

When you take the vacuum over objects that don’t
belong in the vacuum cleaner, such as pieces of
rope or a cat’s tail and the unit comes to a screeching
halt, the burning smell that will soon fill up the
air is your drive belt slowly melting away.

Luckily, the drive belt is available at several
locations, so many in fact that your local drug
store may even carry them! They are cheap to buy
and a snap to replace with a screwdriver and a bit
of common sense. For other types of problems that
you may encounter, there are a lot of resources at
your disposal just in case you decide to tackle
the problem on your own.

You should never forget that when you buy parts for
your vacuum cleaner, most of the parts you’ll need
are going to be specifically made for your particular
brand name and model. With the exception of basic
items such as drive belts and most bags, most parts
aren’t interchangeable between brands and between
different models of the same brand.

The first thing to try when you need a part for
your vacuum cleaner is the local Yellow Pages
book. Inside of the Yellow Pages, you’ll find
many listings for appliance parts and suppliers.
You’ll have to call each one of the individually
to find out if they carry parts for your model
and brand. In the rare event that they don’t
carry what you need, they can normally order it
for you quickly and easily. If that fails, you
can always call the company direct that manufactured
your model of vacuum cleaner and order the part
that way.

Most of the time, you won’t have any problem
getting your hands on a part for your vacuum
cleaner, unless it is a more intricate part that
isn’t readily available. Parts such as the intake
or exhaust port are very tricky to replace, and
you will probably want to have a professional
fix these types of problems.

Drive belts, vacuum bags, and little problems such
as these are a snap to replace. With the older
style of vacuum cleaners, you don’t have to be
an expert to fix a majority of the problems. The
newer models however, require quite a bit of
skill and technique.

One of the most common problems that will happen
is clogging. If your vacuum stops picking up
dirt and dust, chances are it has become clogged,
which is normally not a parts problem. All you
need to do to fix it is take the front assembly
off, then manually clean out the agitators and
the housing where the dirt makes its way upwards
through the vacuum cleaner. This is very easy
to do, and won’t take you but a couple of minutes.

Anytime you encounter a parts problem with your
vacuum cleaner, you should always take things one
step at a time and don’t rush. You can almost
always get a hold of a part. If the part is more
expensive than you anticipated, you can always
scrap the vacuum cleaner and buy yourself a
better one – which will save you a lot of time
and headache in the long run.

Technorati Tags: Appliance Parts, Brand Name, Brushes, Common Sense, Drive Belts, Getting Your Hands, Local Drug Store, Models, Rare Event, Rope, Screeching Halt, Screwdriver, Snap, Swing, Vacuum Clea, Vacuum Cleaner, Vacuum Cleaners, Yellow Pages

The belts for vacuum cleaners can come in many styles
and hundreds of different sizes. Normally, vacuums
use a belt to drive an agitation device, which
is also known as a brush roller. With very few
exceptions, most vacuums will use either a flat
belt, round belt, or a geared style belt.

The type of belt that your vacuum uses is very
important, not only for durability, but performance
as well. The condition and type of belt your
vacuum uses will have a lot of impact on the systems
ability to clean carpet. The proper use of
agitation is almost 70% of the cleaning ability of
a vacuum cleaner.

Suction is also very important. The suction is
what pulls the dirt that is removed from the carpet
into the collection area of the vacuum. The
suction, or airflow, is the key when cleaning
hard surfaces or when using attachments. Without
suction, a vacuum cleaner could only bring more
dirt to the surface of carpet. Even though both
agitation and suction are important with vacuuming,
the agitation is what actually cleans them.

Almost all manufacturers use brush rollers that
are made of wood, metal, or even plastic that
is driven by a suction or brush motor through
the use of three different kinds of belts – round,
geared, or flat.

The round belts are the earliest type as they
were easy to produce and easy to engineer. The
round style, unfortunately, is normally run in
the same space as vacuumed dirt. What this means,
is that almost all of the dirt, staples, and
hair you vacuum up will pass around the belt;
cutting, nicking, or even scratching it along the
way.

Vacuum cleaner belts have to stretch quite a long
way, placing even more stress on the roller and
the motor bearings. The round belt is still
common, and used even today.

The flat style of belts are most often run in a
circular fashion as well, unlike the twisted
route the round belt takes to deliver the
performance in the proper direction.

The style allow manufacturers to run the belt off
of one side of the brush roller, instead of the
center where all of the dirt is. This is truly a
great innovation, as you can eliminate premature
failure due to the soil and dirt in the belt path.

The latest belt design is considered to be the
best in the industry. Even though there are many
variations out there, the geared belt is the
most efficient means to drive a brush. The
geared belt is also known as a positive brush system
because the energy of the brush motor is
transmitted directly to the brush.

Both the brush and the motor are locked by
fixed teeth to each other through a cogged belt
without tension. The resulting direct connection
results in higher cleaning efficiency because
the brush can be driven at a faster speed
regardless of the age of the belt.

The flat style can stretch as they become warm,
which will cause them to lose tension. When
you use your vacuum, the belt is always going to
stretch. Believe it or not, it will lose it’s
tension the moment you put it up to rest in the
closet.

There is however, one real drawback to geared
belts – the cost of the vacuum. Geared belts
are normally used on two motor vacuums. Not
only does this require a separate suction and
brush motor, but it also requires electronic
sensory systems to tell you when something is
wrong with the brush.

Technorati Tags: Agitation, Airflow, Attachments, Carpet, Circular Fashion, Different Kinds, Dirt, Durability, Exceptions, Flat Style, Motor Bearings, Proper Direction, Roller Bearings, Rollers, Staples, Style Belt, Vacuum Belts, Vacuum Cleaner, Vacuum Cleaners, What This Means

As with most things in life, there is really nothing
free. The two most claimed advantages to bagless
vacuum cleaners were lower operating costs and
better performance. As far as the cost issues go,
all vacuums must filter the exhausting air they use
to carry the dirt into the collection area, as they
would otherwise simply pick the dirt up from the
floor and spit it right back out.

Whether you have a bagless HEPA filter, a pre-filter,
or disposable bags, they all need to be changed at
some point. With the average life of a vacuum
cleaner, you can expect to spend the same on either
collection system for filters, but if you value your
time, you can expect to spend quite a bit more on
a bagless system.

To keep your bagless vacuum cleaner operating at
peak levels, you’ll need to empty the dirt container
when it is full and perform regular maintenance on
the filter. The type of filter the vacuum uses will
determine just how much service will be required,
although most use a pleated HEPA filter.

Cleaning
Even though the claim of better airflow performance
with bagless vacuums is true in a sense, over the
life of the vacuum you’ll get the same, or maybe
even better performance from a bagged vacuum cleaner
system.

With bagged vacuum cleaners, the performance will
start at 100% with each new bag then slowly drop
as the bag starts to fill. Just how quickly the
performance drops depends on how well the bag is
constructed. With the average vacuum and the average
bag, you may replace the bag every 3 – 4 weeks
with 90% of performance the first week, 70% in
weeks 2 and 3, then 50% of less in the fourth week.

The short cycle will insure that you get a 100%
peak cleaning every 3 or 4 weeks from the vacuum
cleaner. The filtered cyclonic machines have
filters that are designed to last 6 months, 12
months, and even up to 18 months before they need
to be replaced.

Pets
If you have dogs or cats, whether you see it or
not, almost all domestic animals shed their fur
on a regular basis throughout their lives. Pet
owners often wonder as well, which vacuum is the
best to remove pet hair.

For pretty much the same reasons that fur sticks
to the carpet, it will also stick to your bagless
vacuum’s pleated filter cartridge. The fur will
reduce the performance of airflow, and is also a
pain in the neck to clean off the filter.

Over time, the fiber that makes up the filter can
retain odor from pets, even if you clean the
filter well. If your filter requires replacing
only once a year, you could end up with a vacuum
that spits odors that will stink up your house
pretty bad.

Bagged up
Those vacuums that use bags will often provide
for neat disposal of a full bag. There are some
brands such as BOSCH that actually engineer bag
disposal into the system. With BOSCH canister
vacuums, the replacement of bags is a single
dust free step. The new mega filt bags have a
built in closure system that upon removal,
will slide shut and trap the dirt and debris
inside of the bag, making removal quick and easy.

Still, there are many people out there who love
bagless machines. Bagless vacuums will continue
at a slow place to gain market share, and people
will continue to buy them. For many, a bagless
vacuum can be the right vacuum to have.

Bags are the technology of the past, while bagless
is the technology of the future. There are many
reasons as to why you should go bagless. For
the vacuums of tomorrow, cylinder and bagless
is the key.

Technorati Tags: 12 Months, Airflow Performance, Bagless Vacuum, Bagless Vacuums, Cats, Cyclonic, Dirt, Disposable Bags, Dogs, Domestic Animals, Fur, Hepa Filter, Peak Levels, Pets, Pre Filter, Vacuum Cleaner, Vacuum Cleaners, Vacuum System